不銹鋼玻璃門如何包邊?
隨著科技的不斷發展,玻璃行業也在各行各業之中嶄露頭角,在裝修時對于玻璃新材料的選用是有講究的,為了使顧客能夠更多的選用玻璃材質的裝修材料進行裝修,不銹鋼玻璃門正是其中較為不錯的產品,接下來,為了使大家更為了解,話不多說,直接步入正題吧!
With the continuous development of science and technology, the glass industry is also emerging in all walks of life. When decorating, we pay attention to the selection of new glass materials. In order to enable customers to choose more glass decoration materials for decoration, stainless steel glass door is one of the better products. Next, in order to make everyone know more, let's go straight to the point!
一、玻璃門不銹鋼包邊是怎么做的
1、 How is the stainless steel edge of glass door made
把已經裁割好并經倒角的厚玻璃上下分別裝好上下橫擋,定好門扇的高度(高度包括上下橫在內),如果門扇高度不夠,可用上下橫擋內玻璃邊口處,填墊薄木夾板條進行調整,如果門扇高度超過安裝尺寸,則需請玻璃工裁去厚玻璃門扇的多余部分,因此門扇的玻璃高度寧可短點也不宜過高
Install the upper and lower cross bars respectively on the cut and chamfered thick glass, and set the height of the door leaf (including the upper and lower cross bars). If the height of the door leaf is not enough, it can be adjusted by filling the edge of the glass in the upper and lower cross bars with thin wood splint strips. If the height of the door leaf exceeds the installation size, ask the Glassman to cut off the excess part of the thick glass door leaf. Therefore, the glass height of the door leaf should be shorter than too high
高度確定后應立即把玻璃與上下橫擋進行固定.其方法是在厚玻璃與上下金屬橫擋內的兩側空隙處同時插入小木條,并輕輕敲入其中,然后在小木條、厚玻璃與金屬橫擋空隙之間注入玻璃膠,之后把玻璃與金屬橫擋的空隙縫口用玻璃膠封嚴。
Fix the glass and the upper and lower cross bars immediately after the height is determined The method is to insert small wooden strips into the gaps on both sides of the thick glass and the upper and lower metal cross stops at the same time, and tap them gently, then inject glass glue between the small wooden strip, the thick glass and the metal cross stop, and then seal the gap between the glass and the metal cross stop with glass glue.
二、玻璃門的種類與特點
2、 Types and characteristics of glass doors
1、裝飾玻璃門
1. Decorative glass door
包括磨砂玻璃、壓花玻璃、刻花玻璃、釉面玻璃、噴花玻璃、冰花玻璃、乳化玻璃等種類,主要是制作的花紋不同。色彩各異,光澤感觀效果好,富有非常好的裝飾效果,同時具有耐腐蝕,易清洗,抗沖刷等特點。
Including frosted glass, embossed glass, engraved glass, glazed glass, spray glass, ice glass, emulsified glass and other types, mainly due to different patterns. Different colors, good gloss effect, full of very good decorative effect, and has the characteristics of corrosion resistance, easy cleaning, erosion resistance and so on.
2、防盜玻璃門
2. Anti theft glass door
包括鋼化玻璃、防彈玻璃、夾絲玻璃和夾層玻璃。采光好,易清洗,機械強度高,熱穩定性好,碎裂后不飛散,不易傷人。并且有一定防搶、防盜、防火作用。
Including tempered glass, bulletproof glass, wire glass and laminated glass. It has good daylighting, easy cleaning, high mechanical strength and good thermal stability. It does not scatter after fragmentation and is not easy to hurt people. And it has certain anti robbery, anti-theft and fire prevention functions.
3、玻璃門
3. Energy saving glass door
對玻璃采用特殊工藝和著色,使其更好的吸收太陽輻射熱量,實現效果。其次吸收紫外線和可見光,達到防止紫外線對室內影響以及使光線柔和的目的。
Special technology and coloring are adopted for glass to better absorb the heat of solar radiation and achieve energy-saving effect. Secondly, absorb ultraviolet and visible light to prevent the influence of ultraviolet on the room and soften the light.
4、涂層鍍膜玻璃門
4. Coated glass door
涂層鍍膜玻璃具有視線的單向穿透性的功能(視線只可從有鍍層方觀向無鍍層方)。同時可以擴大室內空間和視野,保溫隔熱隔音效果好。可使用在建筑門廳墻面、柱子、走廊等,在賓館、餐廳、酒家飯店、酒吧、銀行、醫院和寫字樓外墻應用也及為廣泛。
Coated glass has the function of one-way penetration of line of sight (the line of sight can only be viewed from the side with coating to the side without coating). At the same time, it can expand indoor space and vision, and has good thermal insulation and sound insulation effect. It can be used in the walls, columns and corridors of building lobbies. It is also widely used in the exterior walls of hotels, restaurants, restaurants, bars, banks, hospitals and office buildings.
5、感應玻璃門
5. Induction glass door
玻璃感應門從字面理解就是玻璃門加感應門功能集成,可以說是玻璃門的一種,同時也可以說是感應門的一種。玻璃感應門的分類:玻璃感應門按開啟方式分為:平移玻璃感應門,90度平開玻璃感應門,弧形玻璃感應門等。按門體樣式分為:鋁型材有框玻璃感應門、不銹鋼有框玻璃感應門、無框全玻璃感應門等。按感應開啟的方式分為:微波感應玻璃門、手感應玻璃門、紅外感應玻璃門、腳踏感應玻璃門等。
Glass induction door literally means the function integration of glass door and responsive door. It can be said to be a kind of glass door and a kind of induction door at the same time. Classification of glass sensing doors: glass sensing doors are divided into: translational glass sensing doors, 90 degree flat glass sensing doors, arc glass sensing doors, etc. According to the door style, it is divided into: aluminum profile framed glass induction door, stainless steel framed glass induction door, frameless all glass induction door, etc. According to the induction opening mode, it is divided into: microwave induction glass door, hand induction glass door, infrared induction glass door, pedal induction glass door, etc.
以上就是為大家介紹的有關不銹鋼玻璃門的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://pansource.com.cn
The above is the detailed introduction of stainless steel glass door. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://pansource.com.cn